Language selection

Search

Share your thoughts: Proposed new livestock feed ingredient – Tannic acid

Current status: Open

Opened on March 28, 2024 and closes on April 28, 2024

About the consultation

The Canadian Food Inspection Agency (CFIA) is seeking comments on the following proposed new single ingredient feed (SIF) description for tannic acid.

Background

The Feeds Regulations require a proponent to submit a pre-market application for SIFs that are new, have been modified such that they differ from an approved SIF, or are for a new purpose. The CFIA evaluates the information in the application to establish that the SIF is safe, effective, and labelled correctly.

Approved SIFs are currently listed and defined in Schedules IV and V of the Feeds Regulations, with appropriate guarantees, standards, and labelling requirements. The CFIA will be transitioning to the Canadian Feed Ingredients Table (CFIT) that will be incorporated by reference into the proposed Feeds Regulations, 2024 when they come into effect. In preparation for this new approach, the CFIA is consulting on new or amended SIFs so they can be added to the CFIT once it comes into effect. More information on this is available in the Notice to industry: Consultations on new or amended single ingredient feed descriptions.

About the evaluation

The CFIA's Animal Feed Program has completed a detailed evaluation of an application for the approval of a new SIF: tannic acid.

The evaluation considered information related to the following:

The results of the CFIA's evaluation of available scientific data support the safety and efficacy of tannic acid and its intended purpose as a component of microtracers in complete feeds for livestock species.

Therefore, the CFIA recommends that tannic acid be approved as a new SIF and added to the CFIT, accordingly.

Proposed SIF description

The CFIA intends to add tannic acid under Subclass 6.11 (Microtracers) of Class 6 (Non-nutritive ingredients) in part 1 of the CFIT with the following description:

Tannic acid (or hydrolyzable tannins or hydrolyzable gallo-tannins)

is the hydrolyzable fraction of tannins obtained by extraction with water or organic solvents (acetone or ethyl acetate) from a variety of botanical sources (for example, Caesalpinia spinosa, Castanea sativa, Quercus infectoria, Rhus spp.). It is a yellow to light brown powder composed of a low molecular weight polymer of glucose esterified with up to 12 molecules of gallic acid and/or 3‑galloylgallic acid. It shall contain a minimum of 96% tannic acid on a dry matter basis, and it shall contain not more than 12% moisture.

This ingredient is approved for use as a component of microtracers in an amount not to exceed 3% of the microtracer formulations, and in an amount not to exceed 1.5 grams per tonne of the complete feed for livestock species.

It shall be labelled with the following statement:

"This ingredient is approved for use as a component of microtracers in an amount not to exceed 3% of the microtracer formulations and in an amount not to exceed 1.5 grams per tonne of the complete feed for livestock species."

To address worker safety concerns, it shall be labelled with the following statement:

"This ingredient may cause eye, skin and respiratory irritation and/or sensitization. Appropriate protective equipment must be worn during handling. / Cet ingrédient peut causer une irritation des yeux, de la peau et des voies respiratoires et/ou une sensibilisation. Un appareil de protection approprié doit être porté lors de la manutention."

It shall be labelled with guarantees for minimum percent tannic acid, and maximum percent moisture.

An ingredient number will be assigned at the time the SIF is added to the CFIT.

Additional information

Tannic acid is a synonym for hydrolyzable tannins which may include gallotannins and ellagitannin esters. Tannins are naturally present in many plant species. Tannic acid is extracted from plants using solvents, and has a relatively high purity. The composition of tannic acid can vary greatly based on the plant it has been extracted from.

It is approved for use as a component of microtracers as a colour indicator with a maximum inclusion rate of 3% in microtracer formulations, and it is not to exceed 1.5 grams per tonne of the complete feed for livestock species.

Who is the focus of this consultation

Animal feed stakeholders, including:

All comments are welcome from industry, governments, the public, or other organizations or individuals.

How to participate

The CFIA is seeking feedback on the proposed description for tannic acid.

Stakeholders are encouraged to share comments if there are:

The CFIA evaluators will review scientific questions or information for consideration in the evaluation. They will also evaluate non-scientific input and explore appropriate ways of addressing it.

Comments can be sent by email to the Animal Feed Program at cfia.afp-paa.acia@inspection.gc.ca. Please use "tannic acid" in the subject line of the email. The CFIA is asking for comments and feedback by April 28, 2024, 30 days from the date of this posting.

Next steps

The CFIA will review all of the comments received, if no significant scientifically valid concerns are raised, the CFIA will finalize the approval of tannic acid and issue the approval to the applicant. If significant concerns are raised, the CFIA will evaluate the additional information and may, subject to the commenters' consent, forward the comments to the applicant for their response. A what we heard report that summarizes the feedback received will be published.

The SIF will be added to the CFIT at the next update, following publication of the proposed Feeds Regulations, 2024.

Related information

Contact us

Animal Feed Program (AFP)
Canadian Food Inspection Agency
59 Camelot Drive
Ottawa, Ontario K1A 0Y9
Email: cfia.afp-paa.acia@inspection.gc.ca

Date modified: