Pre-approved indicators for caprine (goat) and cervid

The image includes six different views of an orange, circular EID couple. The first row contains three images of the Female - Front part of the EID couple (weight 2.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 344 999 999 which is the last number in the range of identification numbers for capine species. The second row contains three images of the Male – Back part of the EID couple (weight 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.

The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID indicator (weight 3.1 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID piece, followed by the number "344999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the indicator with the female and male parts facing up. The last image of the profile/side view shows the indicator on its side with the female part containing the RFID piece on the left and the male part on the right.

The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID indicator (weight 3.1 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID piece, followed by the number "344999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the indicator with the female and male parts facing up. The last image of the profile/side view shows the indicator on its side with the female part containing the RFID piece on the left and the male part on the right.

The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped non-RFID indicator (weight 2.4 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" and the letters "VIS" over the female end, followed by the number "344999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the indicator with the female and male parts facing up. The last image of the profile/side view shows the indicator on its side with the female part on the left and the male part on the right.

The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped non-RFID indicator (weight 2.4 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" and the letters "VIS" over the female end, followed by the number "344999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the indicator with the female and male parts facing up. The last image of the profile/side view shows the indicator on its side with the female part on the left and the male part on the right.

The image includes 3 different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID indicator (weight 3.15 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID piece, followed by the number "340999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the indicator with the female and male parts facing up. The last image of the profile/side view shows the indicator on its side with the female part containing the RFID piece on the right and the male part on the left.

The image includes 3 different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID indicator (weight 3.15 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID piece, followed by the number "340999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the indicator with the female and male parts facing up. The last image of the profile/side view shows the indicator on its side with the female part containing the RFID piece on the right and the male part on the left.

The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID indicator (weight 16.7 g) that is one solid piece and is wider at one end. A T-shaped hole is in the wide part of the indicator and a small rectangular hole is on the narrow part of the indicator, which is used for fitting the indicator at different widths around the leg. The RFID piece of the indicator is at the wide end of the indicator and is contained in a long, narrow part that sticks out like an antenna beside the rectangular piece of the incator. The first image of the front view shows the identification number "124000344999999" at the top of the middle piece of the indicator, with the number "9999" in large, bold font in the middle and the trademark of the Canadian Cattle Identification Agency below it. On the antenna piece of the indicator is the number "124000344999999". The second image of the rear view shows the indicator with the female and male parts facing up. The last image of the profile/side view shows the indicator on its side with the female part on the left and the male part on the right.

The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped non-RFID indicator (weight 16.0 g) that is one solid piece and is wider at one end. A T-shaped hole is in the wide part of the indicator and a small rectangular hole is on the narrow part of the indicator, which is used for fitting the indicator at different widths around the leg. There is a long, narrow part that sticks out like an antenna beside the rectangular piece of the indicator. The first image of the front view shows the identification number "124000344999999" at the top of the middle piece of the indicator, with the number "9999" in large, bold font in the middle and the trademark of the Canadian Cattle Identification Agency below it. On the antenna piece of the indicator is the number "124000344999999". The second image of the rear view shows the indicator with the female and male parts facing up. The last image of the profile/side view shows the indicator on its side with the female part on the left and the male part on the right.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 6.0 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499" and below it the number "9999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 5.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499", a barcode and below it the number "9999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 6.0 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499" and below it the number "9999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 5.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499", a barcode and below it the number "9999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 5.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 4.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female – Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species. The second row contains three images of the Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 5.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 4.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 11.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499" and below it the number "9999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 5.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499", a barcode and below it the number "9999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 11.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499" and below it the number "9999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 5.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499", a barcode and below it the number "9999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 10.8 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 4.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female – Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 10.8 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 4.0g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 3.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by an asterisk symbol and the number "334999999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the small, triangular secondary indicator (weight 2.1 g). The image of the front view shows the letters "CA" and the logo for the province of Québec and the number "99999" below it in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the small, triangular secondary indicator (weight 1.7 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "3349" and below it the number "99999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 3.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by an asterisk symbol and the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the small, triangular secondary indicator (weight 2.1 g). The image of the front view shows the letters "CA" and the logo for the province of Québec and the number "99999" below it in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the small, triangular secondary indicator (weight 1.7 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "3349" and below it the number "99999" in large, bold font.

The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the EID couple (weight 3.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 3.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 2.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.

The image includes 6 different views of a yellow circular and triangular non-electronic couple. The first row contains 3 images of the female part of the tag (combined weight with male part of 11.5 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows the code "ALTA AG" (standing for Alberta Agriculture) and below it the code "AZZZ" in large, bold font. The image of the rear view shows the code "1F" in large, bold font. The second row contains 3 images of the circular male part of the tag: the front, rear and profile/side view. The image of the front view shows the marking "ALTA AG".

The image includes 6 different views of an orange circular and triangular non-electronic couple. The first row contains 3 images of the female part of the indicator (combined weight with male part of 5.9 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows the code "ALTA AG" (standing for Alberta Agriculture) and below it the code "ABCW" in large, bold font. The image of the rear view shows the code "52F" in large, bold font. The second row contains 3 images of the circular male part of the indicator: the front, rear and profile/side view. The image of the front view shows the marking "ALTA AG".

The image includes 6 different views of a pink circular and yellow triangular non-electronic couple. The first row contains 3 images of the female part of the indicator (combined weight with male part of 11.5 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows a wheat sheaf (official symbol of Saskatchewan) and below it the code "2 E" ("2" being the animal identification number" and "E" the birth year letter) in large, bold font. The image of the rear view shows the code "SRAB" ("S" standing for Saskatchewan and "RAB" being the herd prefix) in large, bold font. The second row contains 3 images of the circular male part of the indicator: the front, rear and profile/side view.

The image includes 6 different views of a pink circular and an orange triangular non-electronic couple. The first row contains 3 images of the female part of the indicator (combined weight with male part of 11.5 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the rear view shows on the left side a wheat sheaf (official symbol of Saskatchewan), and; the marking "S MRC" ("S" standing for Saskatchewan, "MRC" being the herd prefix, "018" being the animal identification number, and "U" being the birth year letter) and below it the code "018 U" in bold font. The second row contains 3 images of the circular male part of the indicator: the front, rear and profile/side view. Other information Manufacturer's Code: GTXF-color Name, other reference: Maxi, single-sided printing Colour: Green, red, yellow, orange, white or pink Notes: Those indicators, pre-approved for all cervids, are gradually being phased out. To comply with the double-tagging requirement, the application of any combination of the five Saskatchewan provincially-approved indicators would be approved. Markings on plastic indicators issued by Saskatchewan: "S" for Saskatchewan, the herd prefix (consisting of three letters), three numbers and a letter that represents the year of birth, e.g. "SSAF002Z". Part of the indicator number on plastic indicators may be on the back, so the full number can only be captured by reading the information on both sides.

The image includes 6 different views of a pink circular and yellow triangular non-electronic couple. The first row contains 3 images of the female part of the indicator (combined weight with male part of 5.9 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows a wheat sheaf (official symbol of Saskatchewan) and below it the code "104 Y" ("104" being the animal identification number" and "Y" being the birth year letter) in large, bold font. The image of the rear view shows the code "S RAB" in large ("S" standing for Saskatchewan and "ARB" being the herd prefix), bold font. The second row contains 3 images of the circular male part of the indicator: the front, rear and profile/side view.

The image includes 6 different views of a pink circular and yellow triangular non-electronic couple. The first row contains 3 images of the female part of the indicator (combined weight with male part of 5.9 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the rear view shows on the left side a wheat sheaf (official symbol of Saskatchewan), and; the marking "S DTT" ("S" standing for Saskatchewan; "DTT" being a herd prefix) and below it the code "123 S" in bold font ("123" being the animal identification number, and "S" being the birth year letter). The second row contains 3 images of the circular male part of the indicator: the front, rear and profile/side view.

The image includes 6 different views of two identical indicators, each one made up of a white circular and triangular non-electronic couple. The first row contains 3 images of the female part of the indicator (combined weight with male part of 11.5 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows the code "MMSC" (corresponding to a herd) and below it the number "0020" (corresponding to the identification number of the animal) in large, bold font. The image of the rear view shows a bison (symbol of the province of Manitoba), and the marking "MANITOBA AGRICULTURE FOOD AND RURAL INITIATIVES" below it. The second row contains 3 images of the circular male part of the indicator: the front, rear and profile/side view. The image of the front view shows the marking "MAN. AGRI".

The image includes six different views of a yellow, circular visual indicator, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the visual couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, and below it the number "99999" in large, bold font. The second row contains three images of the Male – Back part of the visual couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" and below it the number "99999" in large, bold font. The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 5.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 4.0 g). The image of the front view shows the number "124 000 334 999 999" and below it the number "99999" in large, bold font.

The image includes six different views of a yellow, circular visual couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the visual couple (weight 10.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, and below it the number "99999" in large, bold font. The second row contains three images of the Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" and below it the number "99999" in large, bold font. The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 10.8 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 4.0 g). The image of the front view shows the number "124 000 334 999 999" and below it the number "99999" in large, bold font.

The image includes six different views of a yellow, triangular visual couple, and six different views of a yellow, triangular secondary indicator. The first row contains three images of the Female - Front part of the visual couple (weight 3.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font. The second row contains three images of the Male – Back part of the visual couple (weight 2.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font. The third and fourth rows show the secondary indicator which is a large, yellow triangular indicator. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary indicator (weight 3.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary indicator (weight 2.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font.

The image consists of three different views (the front, back and profile/side view) of a thin rectangular white indicator (weight: 4 g) with female and male parts. The first image of the front view of the female part shows the inscription "SASK" on a first row and "AG" below. The second image of the rear view shows the female part of the indicator. The last picture in the first row shows the side view of the female part with the inscription "SHEF". The second row shows images of the male part. The first image shows a front view of the indicator with the inscription "008D". The second image shows the rear view. The last image shows the side view of the male part with the inscription "SASK" on a first row and "AG" below.

The image includes 2 different views of a 2-indicator set. The first image shows the front view of the RFID metal loop indicator (9.5 g) and the secondary non-RFID visual metal loop indicator (8 g) – both indicators have a yellow moulding bearing the same ISO numbers "124000 334999999 " permanently marked on the indicator. The secondary non-RFID indicator in the set is also marked with the letters "VIS" to indicate it is a visual indicator. The second image shows the side view of the metal, thin rectangular-shaped clip, that is 1 solid piece of metal that is bent in the middle with the yellow plastic portion attached along 1 side. The clip is made of stainless steel with a lock system on 1 side.

The image includes three different views of a metal, thin rectangular-shaped clip (weight 4.2 g) that is one solid piece and is bent in the middle. The clip is made of stainless steel and is not painted, with two square holes on the left side when the indicator is facing up. The image on the left shows the bend of the clip on the left side, with the number "5852F" facing out and the tip of the right side of the clip slightly bent towards the inside of the clip. The image on the centre shows the bend of the clip on the right side, with the number "BC-F" facing out beside the two square holes on the left.

The image includes three different views of a metal, thin rectangular-shaped clip (weight 4.2 g) that is one solid piece and is bent in the middle. The clip is made of stainless steel and is not painted, with a lock system on the left side when the indicator is facing up. The image on the left shows the bend of the clip on the left side, with the marking "ALTA AG" above another marking "AMSW" facing out and the tip of the right side of the clip slightly bent towards the inside of the clip. The image on the centre shows the bend of the clip on the right side, with the number "22X" facing out.

The image includes three different views of a metal, thin rectangular-shaped clip (weight 6.0 g), that is one solid piece and is bent in the middle. The clip is made of stainless steel and is painted yellow on one side and orange on the other, with a lock system on the left side when the indicator is facing up. The image on the left shows the bend of the clip on the left side, with the marking "SASKAG" (standing for Saskatchewan Agriculture) facing out and the tip of the right side of the clip slightly bent towards the inside of the clip. The image on the centre shows the bend of the clip on the right side, with the number "031249" facing out.