Bovine (Recommended for Limousin breed) |
RFID (FDX) ear tag |
Yellow/Round |
Pink/Round |
Allflex |
Canadian Cattle Identification Agency |
2023-06-30 |
BOV-01-03A2
The image includes 6 different views of a yellow and pink, circular EID couple. The first row contains 3 images of the yellow Female – Front part of the EID couple (weight 8.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the pink Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "L" with a small outline of a maple leaf superimposed on the top-right of the letter to indicate Limousin.
Other information Manufacturer's code: LM-J11H71000000 Note: Same marking as BOV-01-03A1 but with a new silicon chip. The indicator is recommended for the Limousin breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Gelbvieh breed) |
RFID (FDX) ear tag |
Yellow/Round |
Orange/Round |
Allflex |
Canadian Cattle Identification Agency |
2023-06-30 |
BOV-01-03B2
The image includes 6 different views of a yellow and orange, circular EID couple. The first row contains 3 images of the yellow Female – Front part of the EID couple (weight 8.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the orange Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "G" with the word "Gelbvieh" underneath to indicate Gelbvieh breed.
Other information Manufacturer's code: GB-J11H31000000 Note: Same marking as BOV-01-03B1 but with a new silicon chip. The indicator is recommended for the Gelbvieh breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Hereford breed) |
RFID (FDX) ear tag |
Yellow/Round |
Red/Round |
Allflex |
Canadian Cattle Identification Agency |
2023-06-30 |
BOV-01-03C2
The image includes 6 different views of a yellow and red, circular EID couple. The first row contains 3 images of the yellow Female – Front part of the EID couple (weight 8.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the red Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of a maple leaf with the letter "H" superimposed on the lower right side to indicate Hereford breed.
Other information Manufacturer's code: HF-J11H61000000-25 or HF-J11H61000000-100 Note: Same marking as BOV-01-03C1 but with a new silicon chip. The indicator is recommended for the Hereford breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Simmental breed) |
RFID (FDX2) ear tag |
Yellow/Round |
Blue/Round |
Allflex |
Canadian Cattle Identification Agency |
2023-06-30 |
BOV-01-03D2
The image includes 6 different views of a yellow and blue, circular EID couple. The first row contains 3 images of the yellow Female – Front part of the EID couple (weight 8.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the blue Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of the letter "S" that has part of an outline of a maple leaf on the upper left corner of the letter, and the word "Simmental" in the curve on the right side of the letter indicate Simmental breed.I18
Other information Manufacturer's code: SM-J11H51000000-25 or SM-J11H51000000-100 Note: Note Same marking as BOV-01-03D1 but with a new silicon chip. The indicator is recommended for the Simmental breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX+) ear tag |
Yellow/Round |
Green/Round |
Allflex |
Canadian Cattle Identification Agency |
2023-06-30 |
BOV-01-05A2
The image includes 6 different views of a yellow and green, circular EID couple. The first row contains 3 images of the yellow Female – Front part of the EID couple (weight 8.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the number "01" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the green Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a stylized letter "A" to indicate Angus breed.
Other information Manufacturer's code: CG-J11H41000000, CG-J11H41000000-100, CG-J11H41L41H40 or CG-J11H41X41H40 Note: Same marking as BOV-01-05A1 but with a new silicon chip. The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine |
RFID (FDX+) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
2023-06-30 |
BOV-01-25A1
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female – Front part of the EID couple (weight 8.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: CA-J11H11000000-10, CA-J11H11000000-25, or CA-J11H11000000-100
Name, other reference: FDX+ Ultra EID Tag
Note: Same marking as BOV-01-25A but with a new silicon chip.
|
Bovine |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-01
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 5.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information Name, other reference: CCIA ISO FDX/Small set Manufacturer's code: CA-F11S11000000
|
Bovine |
RFID (HDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-02

The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency. Other informationManufacturer's code: CA-E11S11000000 Name, other reference: CCIA ISO HDX/Small set Note: as of January 2015, this tag is gradually being phased-out of the program and replaced by BOV-01-37 which has the same markings but with a new inlay
|
Bovine |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-03
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: CA-B11S11000000
|
Bovine (Recommended for Limousin breed) |
RFID (FDX) ear tag |
Yellow/Round |
Pink/Round |
Allflex |
Canadian Cattle Identification Agency |
2015/02/09 |
BOV-01-03A
The image includes 6 different views of a yellow and pink, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the pink Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "L" with a small outline of a maple leaf superimposed on the top-right of the letter to indicate Limousin.
Other information Manufacturer's code: LM-G11S71000000 Note: The indicator is recommended for the Limousin breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Limousin breed) |
RFID (FDX) ear tag |
Yellow/Round |
Pink/Round |
Allflex |
Canadian Cattle Identification Agency |
2020/07/06 |
BOV-01-03A1
The image includes 6 different views of a yellow and pink, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the pink Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "L" with a small outline of a maple leaf superimposed on the top-right of the letter to indicate Limousin.
Other information Manufacturer's code: LM-G11H71000000 Note: Same marking as BOV-01-03A but the male portion has been replaced. The indicator is recommended for the Limousin breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Gelbvieh breed) |
RFID (FDX) ear tag |
Yellow/Round |
Orange/Round |
Allflex |
Canadian Cattle Identification Agency |
2015/11/19 |
BOV-01-03B
The image includes 6 different views of a yellow and orange, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the orange Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "G" with the word "Gelbvieh" underneath to indicate Gelbvieh breed.
Other information Manufacturer's code: GB-G11S31000000 Note: The indicator is recommended for the Gelbvieh breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Gelbvieh breed) |
RFID (FDX) ear tag |
Yellow/Round |
Orange/Round |
Allflex |
Canadian Cattle Identification Agency |
2020/07/06 |
BOV-01-03B1
The image includes 6 different views of a yellow and orange, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the orange Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "G" with the word "Gelbvieh" underneath to indicate Gelbvieh breed.
Other information Manufacturer's code: GB-G11H31000000 Note: Same marking as BOV-01-03B but the male portion has been replaced. The indicator is recommended for the Gelbvieh breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Hereford breed) |
RFID (FDX) ear tag |
Yellow/Round |
Red/Round |
Allflex |
Canadian Cattle Identification Agency |
2016/08/24 |
BOV-01-03C
The image includes 6 different views of a yellow and red, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the red Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of a maple leaf with the letter "H" superimposed on the lower right side to indicate Hereford breed.
Other information Manufacturer's code: HF-G11S61000000 Note: The indicator is recommended for the Hereford breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Hereford breed) |
RFID (FDX) ear tag |
Yellow/Round |
Red/Round |
Allflex |
Canadian Cattle Identification Agency |
2020/07/06 |
BOV-01-03C1
The image includes 6 different views of a yellow and red, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the red Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of a maple leaf with the letter "H" superimposed on the lower right side to indicate Hereford breed.
Other information Manufacturer's code: HF-G11H61000000 Note: Same marking as BOV-01-03C but the male portion has been replaced. The indicator is recommended for the Hereford breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Simmental breed) |
RFID (FDX2) ear tag |
Yellow/Round |
Blue/Round |
Allflex |
Canadian Cattle Identification Agency |
2017/04/03 |
BOV-01-03D
The image includes 6 different views of a yellow and blue, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the blue Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of the letter "S" that has part of an outline of a maple leaf on the upper left corner of the letter, and the word "Simmental" in the curve on the right side of the letter indicate Simmental breed.
Other information Manufacturer's code: SM-G11S51000000-25 Note: The indicator is recommended for the Simmental breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Simmental breed) |
RFID (FDX2) ear tag |
Yellow/Round |
Blue/Round |
Allflex |
Canadian Cattle Identification Agency |
2020/07/06 |
BOV-01-03D1
The image includes 6 different views of a yellow and blue, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the blue Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of the letter "S" that has part of an outline of a maple leaf on the upper left corner of the letter, and the word "Simmental" in the curve on the right side of the letter indicate Simmental breed.
Other information Manufacturer's code: SM-G11H51000000 Note: Same marking as BOV-01-03D but the male portion has been replaced. The indicator is recommended for the Simmental breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX) ear tag |
Yellow/Round |
Green/Round |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-04
The image includes 6 different views of a yellow and green, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 5.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the number "01" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the green Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a stylized letter "A" with the word "Angus" underneath to indicate Angus breed.
Other information Manufacturer's code: CG-F11S41000000 Note: The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX+) ear tag |
Yellow/Round |
Green/Round |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-05
The image includes 6 different views of a yellow and green, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the number "01" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the green Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a stylized letter "A" with the word "Angus" underneath to indicate Angus breed.
Other information Manufacturer's code: CG-B11S41000000 Note: The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX+) ear tag |
Yellow/Round |
Green/Round |
Allflex |
Canadian Cattle Identification Agency |
2018/11/27 |
BOV-01-05A
The image includes 6 different views of a yellow and green, circular EID couple. The first row contains 3 images of the yellow Female – Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the number "01" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the green Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a stylized letter "A" to indicate Angus breed.
Other information Manufacturer's code: CG-G11S41000000 Note: The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX+) ear tag |
Yellow/Round |
Green/Round |
Allflex |
Canadian Cattle Identification Agency |
2020/07/06 |
BOV-01-05A1
The image includes 6 different views of a yellow and green, circular EID couple. The first row contains 3 images of the yellow Female – Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the number "01" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the green Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a stylized letter "A" to indicate Angus breed.
Other information Manufacturer's code: CG-G11H41000000 Note: Same marking as BOV-01-05A but the male portion has been replaced. The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Charolais breed) |
RFID (FDX) ear tag |
Yellow/Round |
White/Round |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-06
The image includes 6 different views of a yellow and white, circular EID couple. The first row contains 3 images of the yellow Female - Front part of the EID couple (weight 5.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the number "03" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a letter "C" to indicate Charolais breed.
Other information Manufacturer's code: CC-F11S21000000 Note: The indicator is recommended for the Charolais breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-07
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of New Brunswick followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of New Brunswick with the number "29999 9999" below it.
Other information
Manufacturer's code: NE21J21L23J23
Name, other reference: New Brunswick tag
Note: This tag is gradually being phased-out of the program since January 2015 and replaced by BOV-01-07A which has the same markings but with a new inlay.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-07A
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the logo for the province of New Brunswick followed by the letter "E" and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of New Brunswick with the number "29999 9999" below it.
Other information
Manufacturer's code: NEA21J21L23J23
Name, other reference: New Brunswick tag
Note: Same marking as for BOV-01-07 but with a new inlay
|
Bovine |
RFID (HDX) ear tag |
Yellow/Round |
Yellow/Triangle |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-01-08
The image includes 6 different views of a yellow EID couple. The first row contains 3 images of the yellow, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the yellow, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Ontario with the identification number "124 000 299 999 999" below it.
Other information
Manufacturer's code: BE21J31X32J31
Name, other reference: Beef Improvement Ontario (BIO)
Note: This tag is gradually being phased-out of the program since January 2015
|
Bovine |
RFID (FDX+) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
2011/08/05 |
BOV-01-25
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 9.4 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: G11S11000000
Name, other reference: FDX+ Ultra EID Tag
|
Bovine |
RFID (FDX+) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
2020/07/06 |
BOV-01-25A
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 9.4 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: CA-G11H11000000
Name, other reference: FDX+ Ultra EID Tag
Note: Same marking as BOV-01-25 but the male portion has been replaced.
|
Bovine |
RFID (FDX) ear tag |
Yellow/Triangular Panel |
Yellow/Triangular Panel |
Allflex |
Canadian Cattle Identification Agency |
2015/02/09 |
BOV-01-27
The image includes 6 different views of a yellow, circular and triangular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 17.9 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "A" followed by the number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species, on the circular EID. The large, triangular piece shows the number "299999999" and below it the number "9999" in large, bold font. The second row contains 3 images of the large, triangular Male – Back part of the EID couple (weight 5.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CA-GX23L23000000
Name, other reference: Beef cattle Combo Tag MaxiEID
|
Bovine |
RFID (HDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
2015/02/09 |
BOV-01-37
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: CA-EA11S11000000
Name, other reference: Beef HDX, small set
Note: Same marking as for BOV-01-02 but with a new inlay
|
Bovine |
RFID (HDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
2020/07/06 |
BOV-01-37A
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: CA-EA11H11000000
Name, other reference: Beef HDX, small set
Note: Same marking as for BOV-01-37 but the male portion has been replaced
|
Bovine |
RFID ear tag |
Yellow/Round |
Yellow/Round |
Destron Fearing |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-02-01
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front of the EID couple (weight: tag and stud 10 g) and shows the front, rear and profile/side view of the front part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with an image of a Quick Response barcode followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male - Back of the EID couple (weight: tag and stud 10 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: CAESet2206L
Note: This tag is gradually being phased-out of the program.
|
Bovine |
RFID (FDX+) ear tag |
Yellow/Round |
Yellow/Round |
Destron Fearing |
Canadian Cattle Identification Agency |
2011/09/22 |
BOV-02-02
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 9.4 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with an image of a Quick Response barcode followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: 727-5008-02
Name, other reference: Ultra
|
Bovine |
RFID (FDX+) ear tag |
Yellow/Round |
Yellow/Round |
Destron Fearing |
Canadian Cattle Identification Agency |
2021/06/30 |
BOV-02-03
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with an image of a Quick Response barcode followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code CAESETDMR22-10, CAESETDMR22-25, CAESETDMR22-100
Name, other reference: Ultra
Note: Redesign version of BOV-02-02
|
Bovine |
RFID ear tag |
Yellow/Round |
Yellow/Round |
Reyflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-03-01
The image includes 6 different views of a yellow, circular EID set. The first row contains 3 images of the female part of the set (thickness 4.0mm, weight 5.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the male part of the set (thickness 1.2mm, weight 1.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information Name, other reference: Model ReyFid Button Note: This tag is gradually being phased-out of the program.
|
Bovine |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Y-Tex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-04-01
The image includes 6 different views of a yellow, circular RFID tag. The first row contains 3 images of the female part of the RFID tag and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the male button of the RFID tag and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code 8112124020
Name, other reference Y-Tex TechStar II
|
Bovine |
RFID (FDX) ear tag |
Yellow/Teardrop |
Yellow/Round |
Y-Tex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BOV-04-02
The image includes 4 different views of a yellow RFID tag. The first row contains 3 images of the female part of the RFID tag that is teardrop-shaped, and shows the front, rear and profile/side view of the female part. The image of the front view shows the identification number 124 000 299 999 999 (the last number in the range of identification numbers for bovine species) with the trademark of the Canadian Cattle Identification Agency below it. The second row contains one image of the circular male part of the RFID tag and shows only the front view of the male part (there is no image for the rear and profile/side view). The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information Manufacturer's code: 8112124 Name, other reference: Y-Tex TechStar II Note: This tag is gradually being phased-out of the program.
|
Bovine |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Zee Tag |
Canadian Cattle Identification Agency |
2005/06/27 |
BOV-05-01
The image includes 6 different views of a yellow, circular RFID tag. The first row contains 3 images of the female part of the RFID tag and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the male part of the RFID tag and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: RF-5907T60HAYE02
Note: This tag is gradually being phased-out of the program since January 2015. Has been replaced by BOV-05-02 which has the same markings but has a new inlay.
|
Bovine |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Zee Tag |
Canadian Cattle Identification Agency |
2015/02/09 |
BOV-05-02
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 5.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.6 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: 700-2401-054
|
Bovine (Recommended for Hereford breed) |
RFID (FDX) ear tag |
Yellow/Round |
Red/Round |
Zee Tag |
Canadian Cattle Identification Agency |
2017/11/20 |
BOV-05-03
The image includes 6 different views of a yellow female part and a red male part of a EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 5.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the red Male – Back part of the EID couple (weight 1.6 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "H" with a small outline of a maple leaf superimposed on the top-right of the letter to indicate Hereford.
Other information Manufacturer's code: 100KIT M204 red/F218 FDX-B EM4305 yellow Note: The indicator is recommended for the Hereford breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine |
RFID (HDX) ear tag |
1-piece metal loop |
1-piece metal loop |
Shearwell |
Canadian Cattle Identification Agency |
2021/06/30 |
BOV-06-01
The image includes 3 different views of a metal, thin rectangular-shaped clip (weight 9.1 g), that is 1 solid piece of metal that is bent in the middle with a yellow plastic portion attached along 1 side. The clip is made of stainless steel with a lock system on 1 side. The first image shows the front portion of the clip, with the yellow plastic portion with the numbers "299 999 999" printed on it in black. The second image shows the back of the clip shows the trademark for the Canadian Cattle Identification Agency and the numbers "124 000". The front and back numbers together make "124 000 299 999 999" which is the last number in the range of identification numbers for bovine species. The third image shows the tip of the right side of the clip slightly bent towards the inside of the clip.
Other information Manufacturer's code: METYWHSP00 Name, other reference: 1-piece tag Note: 1-piece metal loop tag
|
Bovine |
RFID (FDX-B) ear tag |
Yellow/Round |
Yellow/Round |
Datamars |
Canadian Cattle Identification Agency |
2017/11/20 |
BOV-08-01A
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front of the EID couple (weight: 6.9 g) and shows the front, rear and profile/side view of the front part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with an image of a Quick Response barcode followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male - Back of the EID couple (weight: 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: 700 2004-212 (with 25 units), 700 2004-213 (with 100 units)
Name, other reference: Comfort Ear Tag
|
Bovine |
RFID (HDX) ear tag |
Yellow/Round |
Yellow/Round |
Datamars |
Canadian Cattle Identification Agency |
2017/11/20 |
BOV-08-01B
The image includes 6 different views of a yellow, circular EID couple, with a black female part bottom. The first row contains 3 images of the Female - Front of the EID couple (weight: 7.2 g) and shows the front, rear and profile/side view of the front part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with an image of a Quick Response barcode followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the Male - Back of the EID couple (weight: 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: 700 2004-214 (with 25 units), 700 2004-215 (with 100 units)
Name, other reference: Comfort Ear Tag
|
Bovine (Recommended for Limousin breed) |
RFID (FDX) ear tag |
Yellow/Round |
Pink/Round |
Datamars |
Canadian Cattle Identification Agency |
2018/11/27 |
BOV-08-02
The image includes six different views of a yellow and pink, circular EID couple. The first row contains three images of the yellow Female – Front part of the EID couple (weight 6.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with a Quick Response barcode followed by and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains three images of the pink Male – Back part of the EID couple (weight 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "L" to indicate Limousin with a small outline of a maple leaf superimposed on the top-right of the letter.
Other Information: Manufacturer's code: 700 2501-549 Note: The indicator is recommended for the Limousin breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Simmental breed) |
RFID (FDX) ear tag |
Yellow/Round |
Blue/Round |
Datamars |
Canadian Cattle Identification Agency |
2018/11/27 |
BOV-08-03
The image includes six different views of a yellow and blue, circular EID couple. The first row contains three images of the yellow Female – Front part of the EID couple (weight 6.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with a Quick Response barcode followed by and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains three images of the blue Male – Back part of the EID couple (weight 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "S" to indicate Simmental with a small outline of a maple leaf superimposed on the top-right of the letter.
Other information Manufacturer's code: 700 2501-548 Note: The indicator is recommended for the Simmental breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX) ear tag |
Yellow/Round |
Green/Round |
Datamars |
Canadian Cattle Identification Agency |
2018/11/27 |
BOV-08-04
The image includes six different views of a yellow and green, circular EID couple. The first row contains three images of the yellow Female – Front part of the EID couple (weight 6.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with a Quick Response barcode followed by and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains three images of the green Male – Back part of the EID couple (weight 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "A" to indicate Angus with a small outline of a maple leaf superimposed on the top-right of the letter.
Other information Manufacturer's code: 700 2501-547 Note: The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Shorthorn breed) |
RFID (FDX) ear tag |
Yellow/Round |
Purple/Round |
Datamars |
Canadian Cattle Identification Agency |
2018/11/27 |
BOV-08-05
The image includes six different views of a yellow and purple, circular EID couple. The first row contains three images of the yellow Female – Front part of the EID couple (weight 6.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with a Quick Response barcode followed by and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains three images of the purple Male – Back part of the EID couple (weight 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "S" to indicate Shorthorn with a small outline of a maple leaf superimposed on the top-right of the letter.
Other information Manufacturer's code: 700 2501-550 Note: The indicator is recommended for the Shorthorn breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Gelbvieh breed) |
RFID (FDX-B) ear tag |
Yellow/Round |
Orange/Round |
Datamars |
Canadian Cattle Identification Agency |
2019/11/29 |
BOV-08-06
The image includes six different views of a yellow and orange, circular EID couple. The first row contains three images of the yellow Female – Front part of the EID couple (weight 6.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with a Quick Response barcode followed by and the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains three images of the orange Male – Back part of the EID couple (weight 1.8 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows a large "G" with the word "GELBVIEH" underneath to indicate the breed Gelbvieh.
Other information Manufacturer's code: 700 2501-563 Note: The indicator is recommended for the Gelbveih breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine |
RFID (HDX) ear tag |
Yellow/Round |
Yellow/Round |
Leader |
Canadian Cattle Identification Agency |
2022/05/20 |
BOV-09-01
The image includes 6 different views of a yellow, circular RFID tag. The first row contains 3 images of the yellow, circular Female - Front part of the RFID tag (weight 6.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of Canadian Cattle Identification Agency with the letter "CA" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the yellow, circular Male – Back part of the RFID tag (weight 2.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of Canadian Cattle Identification Agency with the letter "CA".
Other information Manufacturer's code: OFE1DC7MB
|
Bovine |
RFID ear tag |
White/Round |
White/Triangle |
Allflex |
Lactanet Canada |
Between December 2000 and November 2010 |
BOV-01-09
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CE22J23L22L23
Name, other reference: Holstein Canada Regular EID – full set
|
Bovine |
RFID ear tag |
White/Round |
White/Triangle |
Allflex |
Lactanet Canada |
Between December 2000 and November 2010 |
BOV-01-10
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CE22J23000000 (also referred to CE22J23X23L23 and CE22J23L22L23 if purchased with a non-RFID secondary tag bearing the same identification number)
Note: This tag is gradually being phased-out of the program since January 2015, and is being replaced by BOV-01-32 which has the same markings but a new inlay.
|
Bovine |
RFID ear tag |
White/Round |
White/Triangle |
Allflex |
Lactanet Canada |
Between December 2000 and November 2010 |
BOV-01-11
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the letter "R" and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: RE22J23000000
Name, other reference: Holstein Canada Regular EID – EID Retagging
Note: This tag is gradually being phased-out of the program since January 2015. Replacement tag.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triagular panel |
Allflex |
Lactanet Canada |
2013/04/22 |
BOV-01-21D
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CE22U23U22U23
Note: This tag is gradually being phased-out of the program since January 2015 and replaced by BOV-01-33 which has the same markings but with a new inlay.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triagular panel |
Allflex |
Lactanet Canada |
2013/04/22 |
BOV-01-21E
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the letter "R" and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: RE22U23000000
Note: This tag is gradually being phased-out of the program since January 2015, and replaced by BOV-01-34 which has the same markings but with a new inlay. Replacement tag.
|
Bovine |
RFID (HDX) ear tag |
White/Triangular panel |
White/Triagular panel |
Allflex |
Lactanet Canada |
2012/03/20 |
BOV-01-26A
The image includes 6 different views of a white EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 17.3 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "A" followed by the number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species, on the circular EID. The large, triangular piece shows the number "299999999" and below it the number "9999" in large, bold font. The second row contains 3 images of the large, triangular Male – Back part of the EID couple (weight 5.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CDX23L23X23L23
Name, other reference: Holstein Canada Combo Tag MaxiEID – full set
Note: The approval of this resulted from a chip replacement of tag BOV-01-12. This tag is gradually being phased-out of the program since January 2015 and replaced by BOV-01-35 which has the same markings but a new inlay.
|
Bovine |
RFID (HDX) ear tag |
White/Triangular panel |
White/Triagular panel |
Allflex |
Lactanet Canada |
2012/03/20 |
BOV-01-26B
The image includes 6 different views of a white EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 17.2 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark for the Canadian Cattle Identification Agency with the letter "A" followed by number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species, on the circular EID. The large, triangular piece shows the number "299999999" and below it the number "9999" in large, bold font. The second row contains 3 images of the large, triangular Male – Back part of the EID couple (weight 5.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the letter "R" and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: RDX23L23000000
Name, other reference: Holstein Canada Combo Tag MaxiEID – EID Replacement
Note: The approval of this tag resulted from a chip replacement of tag BOV-01-15. This tag is gradually being phased-out of the program since January 2015, and replaced by BOV-01-36 which has the same markings but with a new inlay. Replacement tag.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triagular panel |
Allflex |
Lactanet Canada |
2015/02/09 |
BOV-01-32
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CEA22J23000000 (also referred to CEA22J23L22L23 or CEA22J23X23L23 if purchased with a non-RFID secondary tag bearing the same identification number)
Note: Same marking as for BOV-01-10 but with a new inlay
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triagular panel |
Allflex |
Lactanet Canada |
2015/02/09 |
BOV-01-33
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CEA22U23U22U23
Note: Same marking as for BOV-01-21D but with a new inlay.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triagular panel |
Allflex |
Lactanet Canada |
2020/07/06 |
BOV-01-33A
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CEA22V23U22V23 or CEA22V23UX23V23
Note: Same marking as for BOV-01-33 but the male portion has been replaced
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triagular panel |
Allflex |
Lactanet Canada |
2015/02/09 |
BOV-01-34
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the letter "R" and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: REA22U23000000
Note: Same marking as for BOV-01-21E but with new inlay. Replacement tag.
|
Bovine |
RFID (HDX) ear tag |
White/Triangular panel |
White/Triangular panel |
Allflex |
Lactanet Canada |
2015/02/09 |
BOV-01-35
The image includes 6 different views of a white EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 17.2 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E" followed by the number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species, on the circular EID. The large, triangular piece shows the number "299999999" and below it the number "9999" in large, bold font. The second row contains 3 images of the large, triangular Male – Back part of the EID couple (weight 5.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CEX23L23X23L23
Name, other reference: Holstein Canada Combo Tag MaxiEID – full set
Note: Same marking as for BOV-01-26A but with a new inlay.
|
Bovine |
RFID (HDX) ear tag |
White/Triangular panel |
White/Triangular panel |
Allflex |
Lactanet Canada |
2015/02/09 |
BOV-01-36
The image includes 6 different views of a white EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 17.2 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E" followed by the number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species, on the circular EID. The large, triangular piece shows the number "299999999" and below it the number "9999" in large, bold font. The second row contains 3 images of the large, triangular Male – Back part of the EID couple (weight 5.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the letter "R" and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: REX23L23000000
Name, other reference: Holstein Canada Combo Tag MaxiEID – EID Replacement
Note: Same marking as for BOV-01-26B but with new inlay. Replacement tag.
|
Bovine |
RFID (HDX) ear tag |
White/Triangular panel |
White/Triangle |
Allflex |
Lactanet Canada |
2015/10/15 |
BOV-01-40
The image includes 6 different views of a white EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 17.0 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "A" followed by the number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species, on the circular EID. The large, triangular piece shows the number "299999999" and below it the number "9999" in large, bold font. The second row contains 3 images of the smaller, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information Manufacturer's code: CUXU23UX23U23 Name, other reference: Name, other reference: Holstein Canada, combo of panel and Ultraflex male part
|
Bovine |
RFID (HDX) ear tag |
White/Triangular panel |
White/Triangular panel |
Allflex |
Lactanet Canada |
2020/07/06 |
BOV-01-40A
The image includes 6 different views of a white EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 17.0 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "A" followed by the number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species, on the circular EID. The large, triangular piece shows the number "299999999" and below it the number "9999" in large, bold font. The second row contains 3 images of the smaller, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: CUXV23UX23V23 or RUX23V23000000
Name, other reference: Holstein Canada, combo of panel and Ultraflex male part
Note: Same marking as for BOV-01-40 but the male portion has been replaced
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Lactanet Canada |
2020/10/05 |
BOV-01-41
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: DTEA22V23U22V23 or DTEA22V23UX23V23 or DTBEA22U23000000 - marking 1 or RDTEA22V23000000 (replacement tag)
Name, other reference: DairyTrace Canada, combo tag
|
Bovine |
RFID (HDX) ear tag |
White/Triangular panel |
White/Triangle |
Allflex |
Lactanet Canada |
2020/10/05 |
BOV-01-42
The image includes 6 different views of a white EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 17.0 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark of DairyTrace with the letter "E" followed by the number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species, on the circular EID. The large, triangular piece shows the number "299999999" and below it the number "9999" in large, bold font. The second row contains 3 images of the smaller, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace and below it the number "299999999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: DTUXV23UX23V23 or RDTUX23V23000000 (replacement tag)
Name, other reference: DairyTrace Ultraflex Combo, panel and Ultraflex male part
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Lactanet Canada |
2020/10/05 |
BOV-01-43
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace and below it the number "299999999".
Other information
Manufacturer's code: DTBEA22U23000000 - marking 2
Name, other reference: DairyTrace tag
|
Bovine |
RFID (HDX) ear tag |
White/Round |
Blue/Triangle |
Allflex |
Lactanet Canada |
2023/02/15 |
BOV-01-43A
The image includes 6 different views of a white and blue EID couple. The first row contains 3 images of the white, circular Female – Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the letter "E" followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the blue, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace and below it the number "299999999" and "P3" in large font.
Other information Manufacturer's code: DTBEA22V25000000 Name, other reference: DairyTrace tag Note : Same marking as for BOV-01-43 but the male portion has been replaced.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
Between December 2000 and November 2010 |
BOV-01-16
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it the number "29999" and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV023/025/026 (marking 1)
Note: This tag is gradually being phased-out of the program since March 2011.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
Between December 2000 and November 2010 |
BOV-01-17
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec with the number "29999 9999" and the number "9999" in larger font.
Other information
Manufacturer's code: ATQBOV023/025/026 (marking 2)
Note: This tag is gradually being phased-out of the program since March 2011.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
Between December 2000 and November 2010 |
BOV-01-18
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec with the number "29999 9999" and a solid black line below it.
Other information
Manufacturer's code: ATQBOV023/025/026 (marking 3)
Note: This tag is gradually being phased-out of the program since March 2011.
|
Bovine (Recommended for Angus breed) |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
Between December 2000 and November 2010 |
BOV-01-19
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the word "ANGUS" followed by the number "2999" and the number "99999" in large, bold font.
Other information Manufacturer's code: ATQBOV029/030 Note: This tag is gradually being phased-out of the program since March 2011. The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/03/13 |
BOV-01-21A
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g for HDX, and weight 5.7 g for FDX) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV031/032/033/034 (marking 1)
Note: This tag is gradually being phased-out of the program since January 2015 and replaced by BOV-01-28 which has the same markings but with a new inlay.
|
Bovine |
RFID (FDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/03/13 |
BOV-01-21B
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g for HDX, and weight 5.7 g for FDX) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV041/042/043/044 (marking 1)
|
Bovine |
RFID (FDX+) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/09/22 |
BOV-01-21C
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 9.2 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV051/052/053/054 (marking 1)
|
Bovine |
RFID (FDX+) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/07/06 |
BOV-01-21C1
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 9.2 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV141/142/143/144 (marking 1)
Note: Same marking as for BOV-01-21C but the male portion has been replaced
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/03/13 |
BOV-01-22A
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g for HDX, and weight 5.7 g for FDX) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "123" in large, bold font.
Other information
Manufacturer's code: ATQBOV031/032/033/034 (marking 2)
Note: This tag is gradually being phased-out of the program since January 2015, and replaced by BOV-01-29 which has the same markings but with a new inlay.
|
Bovine |
RFID (FDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/03/13 |
BOV-01-22B
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g for HDX, and weight 5.7 g for FDX) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "123" in large, bold font.
Other information
Manufacturer's code: ATQBOV041/042/043/044 (marking 2)
|
Bovine |
RFID (FDX+) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/09/22 |
BOV-01-22C
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 9.2 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "123" in large, bold font.
Other information
Manufacturer's code: ATQBOV051/052/053/054 (marking 1)
|
Bovine |
RFID (FDX+) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/07/06 |
BOV-01-22C1
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 9.2 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "123" in large, bold font.
Other information
Manufacturer's code ATQBOV141/142/143/144 (marking 2)
Note: Same marking as for BOV-01-22C but the male portion has been replaced
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/03/13 |
BOV-01-23A
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g for HDX, and weight 5.7g for FDX) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999" and a solid black line.
Other information
Manufacturer's code: ATQBOV031/032/033/034 (marking 3)
Note: This tag is gradually being phased-out of the program since January 2015 and replaced by BOV-01-30 which has the same markings but with a new inlay.
|
Bovine |
RFID (FDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/03/13 |
BOV-01-23B
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g for HDX, and weight 5.7g for FDX) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999" and a solid black line.
Other information
Manufacturer's code: ATQBOV041/042/043/044 (marking 3)
|
Bovine |
RFID (FDX+) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/09/22 |
BOV-01-23C
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 9.2 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999" and a solid black line.
Other information
Manufacturer's code: ATQBOV051/052/053/054 (marking 3)
|
Bovine |
RFID (FDX+) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/07/06 |
BOV-01-23C1
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 9.2 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999" and a solid black line.
Other information
Manufacturer's code: ATQBOV141/142/143/144 (marking 3)
Note: Same marking as for BOV-01-23C but the male portion has been replaced
|
Bovine (Recommended for Angus breed) |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/03/13 |
BOV-01-24A
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g for HDX, and weight 5.7 g for FDX) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the word "ANGUS" followed by the number "299 999 999", a solid black line and "9999" in large, bold font.
Other information Manufacturer's code: ATQBOV035/036 Note: This tag is gradually being phased-out of the program since January 2015, and replaced by BOV-01-31 which has the same markings but with a new inlay. The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/03/13 |
BOV-01-24B
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.9 g for HDX, and weight 5.7 g for FDX) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the word "ANGUS" followed by the number "299 999 999", a solid black line and "9999" in large, bold font.
Other information Manufacturer's code: ATQBOV045/046 Note: The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX+) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2011/09/22 |
BOV-01-24C
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 9.2 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the word "ANGUS" followed by the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information Manufacturer's code: ATQBOV055/056 Note: The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (FDX+) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/07/06 |
BOV-01-24C1
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 9.2 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the word "ANGUS" followed by the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information Manufacturer's code: ATQBOV145/146 Note: Same marking as for BOV-01-24C but the male portion has been replaced. The tag will be green in colour when available on the market but only white was available for pictures at the time of submission. The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
Whte/Triangle |
Allflex |
Attestra |
2015/02/09 |
BOV-01-28
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV061/062/063/064 (marking 1)
Note: Same marking as for BOV-01-21A but with a new inlay
|
Bovine |
RFID (HDX) ear tag |
White/Round |
Whte/Triangle |
Allflex |
Attestra |
2020/07/06 |
BOV-01-28A
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV131/132/133/134 (marking 1)
Note: Same marking as for BOV-01-28 but the male portion has been replaced
|
Bovine |
RFID (HDX) ear tag |
White/Round |
Whte/Triangle |
Allflex |
Attestra |
2015/02/09 |
BOV-01-29
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "123" in large, bold font.
Other information
Manufacturer's code: ATQBOV061/062/063/064 (marking 2)
Note: Same marking as for BOV-01-22A but with a new inlay
|
Bovine |
RFID (HDX) ear tag |
White/Round |
Whte/Triangle |
Allflex |
Attestra |
2020/07/06 |
BOV-01-29A
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "123" in large, bold font.
Other information
Manufacturer's code: ATQBOV131/132/133/134 (marking 2)
Note: Same marking as for BOV-01-29 but the male portion has been replaced
|
Bovine |
RFID (HDX) ear tag |
White/Round |
Whte/Triangle |
Allflex |
Attestra |
2015/02/09 |
BOV-01-30
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999" and a solid black line.
Other information
Manufacturer's code: ATQBOV061/062/063/064 (marking 3)
Note: Same marking as for BOV-01-23A but with a new inlay.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
Whte/Triangle |
Allflex |
Attestra |
2020/07/06 |
BOV-01-30A
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the number "299 999 999" and a solid black line.
Other information
Manufacturer's code: ATQBOV131/132/133/134 (marking 3)
Note: Same marking as for BOV-01-30 but the male portion has been replaced
|
Bovine (Recommended for Angus breed) |
RFID (HDX) ear tag |
White/Round |
Whte/Triangle |
Allflex |
Attestra |
2015/02/09 |
BOV-01-31
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the word "ANGUS" followed by the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information Manufacturer's code: ATQBOV065/066 Note: Same marking as for BOV-01-24A but with a new inlay. The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Angus breed) |
RFID (HDX) ear tag |
White/Round |
Whte/Triangle |
Allflex |
Attestra |
2020/07/06 |
BOV-01-31A
The image includes 6 different views of a white EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec and below it is the word "ANGUS" followed by the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information Manufacturer's code: ATQBOV135/136 Note: Same marking as for BOV-01-31 but the male portion has been replaced. The indicator is recommended for the Angus breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Limousin breed) |
RFID (HDX) ear tag |
White/Round |
Pink/Triangle |
Allflex |
Attestra |
2015/10/15 |
BOV-01-38
The image includes 6 different views of a white and pink EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the pink, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec. Below the trademark and logo is the letter "L" with an outline of a maple leaf superimposed on the top right of the letter indicating Limousin breed, followed by the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information Manufacturer's code: ATQBOV035L Note: The indicator is recommended for the Limousin breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine (Recommended for Limousin breed) |
RFID (FDX) ear tag |
White/Round |
Pink/Triangle |
Allflex |
Attestra |
2015/10/15 |
BOV-01-39
The image includes 6 different views of a white and pink EID couple. The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the logo for the province of Québec, followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the pink, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the logo for the province of Québec. Below the trademark and logo is the letter "L" with an outline of a maple leaf superimposed on the top right of the letter indicating Limousin breed, followed by the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information Manufacturer's code: ATQBOV045L Note: The indicator is recommended for the Limousin breed but is approved for all bovine. The CFIA will not verify that the animal bearing the approved tag is of that breed.
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/10/05 |
BOV-01-44
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV/233/234 - Marking 1
Name, other reference: Attestra DairyTrace tag
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/10/05 |
BOV-01-45
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "1234" in large, bold font.
Other information
Manufacturer's code: ATQBOV/233/234 - Marking 2
Name, other reference: Attestra DairyTrace tag
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/10/05 |
BOV-01-46
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the logo for the province of Québec and the letter "E", followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace followed by the logo for the province of Québec and below it is the number "299 999 999" and a solid black line.
Other information
Manufacturer's code: ATQBOV/233/234 - Marking 3
Name, other reference: Attestra DairyTrace tag
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/10/05 |
BOV-01-47
The image includes 6 different views of a white EID couple representing "Marking 1". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 5.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the logo for the province of Québec, followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "9999" in large, bold font.
Other information
Manufacturer's code: ATQBOV/243/244 - Marking 1
Name, other reference: Attestra DairyTrace tag
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/10/05 |
BOV-01-48
The image includes 6 different views of a white EID couple representing "Marking 2". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 5.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the logo for the province of Québec, followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace followed by the logo for the province of Québec and below it is the number "299 999 999", a solid black line and the number "1234" in large, bold font.
Other information
Manufacturer's code: ATQBOV/243/244 - Marking 2
Name, other reference: Attestra DairyTrace tag
|
Bovine |
RFID (HDX) ear tag |
White/Round |
White/Triangle |
Allflex |
Attestra |
2020/10/05 |
BOV-01-49
The image includes 6 different views of a white EID couple representing "Marking 3". The first row contains 3 images of the white, circular Female - Front part of the EID couple (weight 5.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of DairyTrace with the logo for the province of Québec, followed by the identification number 124 000 299 999 999 which is the last number in the range of identification numbers for bovine species. The second row contains 3 images of the white, triangular Male – Back part of the EID couple (weight 4.4 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of DairyTrace followed by the logo for the province of Québec and below it is the number "299 999 999" and a solid black line.
Other information
Manufacturer's code: ATQBOV/243/244 - Marking 3
Name, other reference: ATQ DairyTrace tag
|
Bison |
RFID (HDX) ear tag |
White/Round |
White/Round |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
BIS-01-01
The image includes 6 different views of a white, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 8.9 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the identification number 124 000 304 999 999 which is the last number in the range of identification numbers for bison. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of a bison standing in front of a maple leaf which is the logo for the Canadian Bison Association.
Other information
Manufacturer's code: CB-E21B21000000 (also referred to CB-E21B21X21B21 if tag is sold with dual non-RFID tag bearing the same identification number)
Note: This tag is gradually being phased-out of the program since January 2015, and replaced by BIS-01-03 which has the same markings but with a new inlay.
|
Bison |
RFID (HDX) ear tag |
White/Round |
White/Round |
Allflex |
Canadian Cattle Identification Agency |
2015-02-09 |
BIS-01-03
The image includes 6 different views of a white, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E", followed by the identification number 124 000 304 999 292 which is a number within the range of identification numbers for bison. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of a bison standing in front of a maple leaf which is the logo for the Canadian Bison Association.
Other information
Manufacturer's code: CB-EA21B21000000 (also referred to CB-EA21S11X21B21 if tag is sold with secondary non-RFID tag bearing the same identification number)
Note: Same marking as for BIS-01-01 but with a new inlay.
|
Bison |
RFID (HDX) ear tag |
White/Round |
White/Round |
Allflex |
Canadian Cattle Identification Agency |
2020-07-06 |
BIS-01-03A
The image includes 6 different views of a white, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency with the letter "E", followed by the identification number 124 000 304 999 292 which is a number within the range of identification numbers for bison. The second row contains 3 images of the Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows an outline of a bison standing in front of a maple leaf which is the logo for the Canadian Bison Association.
Other information
Manufacturer's code: CB-EA21H21000000 (also referred to CB- EA21H21X21B21 if tag is sold with secondary non‐RFID tag bearing the same identification number)
Note: Same marking as for BIS-01-03 but the male portion has been replaced.
|
Sheep
(Ovine) |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
OVI-01-01
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 3.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number "124000319999999" which is a number within the range of identification numbers for ovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "319999999".
Other information
Manufacturer's code: CS-V11B11000000 (also referred to CS-V11B11011011 if visual tag with the same identification number was also provided)
Note: The tag is gradually being phased-out from the program since December 2011.
|
Sheep
(Ovine) |
Non-electronic ear tag |
Pink/Triangle panel |
Pink/Triangle panel |
Allflex |
Canadian Cattle Identification Agency |
Between December 2000 and November 2010 |
OVI-01-02
The image includes 6 different views of a pink EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 2.6 g) and shows the front, rear and profile/side view of the female part that contains a circular EID attached to a large, triangular piece. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "319999999" on the large, triangular piece. The second row contains 3 images of the triangular Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and below it the number "9999" followed by an image of a linear barcode.
Other information
Manufacturer's code: CS-O11O11000000
Note: The tag is gradually being phased-out from the program since July 2011.
|
Sheep
(Ovine) |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Canadian Cattle Identification Agency |
2011/12/02 |
OVI-01-04
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 3.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the asterisk symbol, followed by the identification number "124000319999999" which is a number within the range of identification numbers for ovine species. The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "319999999".
Other information
Manufacturer's code: CS-W11B11000000 (also referred to as CS-W11B11011011 if visual tag with the same identification number was provided)
Note: The approval of the tag OVI-01-04 resulted from a chip replacement of tag OVI-01-01.
|
Sheep
(Ovine) |
RFID (FDX) One-piece ear tag |
Yellow/One-piece |
Yellow/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
2008/12/22 |
OVI-06-01
The image includes 3 different views (the front, rear and profile/side view) of a yellow, thin, rectangular-shaped RFID tag (weight 3 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID, followed by the number "310000000" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up with "Shearwell Data Ltd." and the number "20" in a circle embossed on the middle. The last image of the profile/side view shows the tag on its side with the male part on the left and the female part containing the RFID on the right.
Other information Manufacturer's code: ESTYWFSP0 Name, other reference: Shearwell SET RFID Tag
|
Sheep
(Ovine) |
RFID (FDX-B) One-piece ear tag |
Yellow/One-piece |
Yellow/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
2013/02/14 |
OVI-06-02
The image includes 3 different views (the front, rear and profile/side view) of a yellow, thin, rectangular-shaped RFID tag (weight 3.0 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID, followed by the number "310000000" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up with "Shearwell Data Ltd." and the number "10" in a circle embossed on the middle. The last image of the profile/side view shows the tag on its side with the male part on the right and the female part containing the RFID on the left.
Other information
Manufacturer's code ASGYWFSPC
Name, other reference: Shearwell ASET RFID Tag
|
Sheep
(Ovine) |
RFID (HDX-B) One-piece ear tag |
Yellow/One-piece |
Yellow/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
2022/05/20 |
OVI-06-03
The image includes 3 different views (the front, rear and profile/side view) of a yellow, thin, rectangular-shaped RFID tag (weight 3.15 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID, followed by the number "310999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the male part on the left and the female part containing the RFID on the right.
Other information
Manufacturer's code: ASGYHWSPC
Name, other reference: ASET RFID tag
Note: Physically, it is the same indicator as OVI-06-02
|
Sheep
(Ovine) |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Attestra |
Between December 2000 and November 2010 |
OVI-01-03
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 3.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the logo for the province of Québec followed by the number "319999999". The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the logo for the province of Québec followed by the number "319999999".
Other information
Manufacturer's code: ATQOVI013 + ATQOVI015
Note: The tag is gradually being phased-out from the program since December 2011.
|
Sheep
(Ovine) |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Round |
Allflex |
Attestra |
2011/12/02 |
OVI-01-04A
The image includes 6 different views of a yellow, circular EID couple. The first row contains 3 images of the Female - Front part of the EID couple (weight 3.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency, the logo for the province of Québec and the asterisk symbol, followed by the number "319999999". The second row contains 3 images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the logo for the province of Québec followed by the number "319999999".
Other information
Manufacturer's code: ATQOVI023 + ATQOVI025
Note: The approval of the tag OVI-01-04A resulted from a chip replacement of tag OVI-01-03.
|
Pig |
Non-electronic ear tag |
Various/Round |
Various/Triangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-01A
TThe image includes 6 different views of a yellow couple. The first row contains 3 images of the circular Female - Front part of the couple (weight 2.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace. The second row contains 3 images of the triangular Male – Back part of the couple (weight 3.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the identification number "124000 499 999 999" which is the last number in the range of identification numbers for pigs. Below the trademark and identification number is the number "12345B" in a large, bold font.
Other information Manufacturer's code: CPCAIDS01 Colours: Yellow, white or pink Note: Identification number unique to the animal using the ISO 11784 standard (15 digits). A 6-character management number may be added voluntarily.
|
Pig |
Non-electronic ear tag |
Various/Round |
Various/Triangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR_01-01B
The image includes 6 different views of a yellow EID couple. The first row contains 3 images of the circular Female - Front part of the EID couple (weight 2.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace. The second row contains 3 images of the triangular Male – Back part of the EID couple (weight 3.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the number "76548" which is an example of a herd mark. Below the trademark and herd mark is the number "12345B" in a large, bold font.
Other information Manufacturer's code: CPCPID001 Colours: Yellow, white or pink Note: Includes a 5-character herd mark. A 6-character management number may be added voluntarily
|
Pig |
Non-electronic ear tag |
Various/Round |
Various/Rectangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-02A
The image includes 6 different views of a yellow couple. The first row contains 3 images of the circular Female - Front part of the couple (weight 2.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace. The second row contains 3 images of the rectangular Male – Back part of the couple (weight 4.6 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the identification number "124000 499 999 999" which is the last number in the range of identification numbers for pigs. Below the trademark and identification number is the number "12345B" in a large, bold font.
Other information Manufacturer's code: CPCAIDS03 Colours: Yellow, white or pink Note: Includes an identification number unique to the animal using the ISO 11784 standard (15 digits). A 6-character management number may be added voluntarily.
|
Pig |
Non-electronic ear tag |
Various/Round |
Various/Rectangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-02B
The image includes 6 different views of a yellow couple. The first row contains 3 images of the circular Female - Front part of the couple (weight 2.5 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace. The second row contains 3 images of the rectangular Male – Back part of the couple (weight 4.6 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the number "76548" which is an example of a herd mark. Below the trademark and herd mark is the number "12345B" in a large, bold font.
Other information Manufacturer's code: CPCPIDS03 Colours: Yellow, white or pink Note: Includes a 5-character herd mark. A 6-character management number may be added voluntarily.
|
Pig |
Non-electronic ear tag |
Yellow/Triangle |
Yellow/Triangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-03A
The image includes 6 different views of a yellow, triangular M17/M18 couple. The first row contains 3 images of the Female - Front part of the couple (weight 2.1 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace in the top right of the triangular piece. The second row contains 3 images of the Male I115– Back part of the couple (weight 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace at the top and below it the identification number "124000 499" and below that "999999" in a larger font.
Other information Manufacturer's code: CPCAID005 Note: Includes an identification number unique to the animal using the ISO 11784 standard (15 digits, with last six digits in larger font). Tag recommended for use with piglets.
|
Pig |
Non-electronic ear tag |
Yellow/Triangle |
Yellow/Triangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-03B
The image includes 6 different views of a yellow, triangular M17/M18 couple. The first row contains 3 images of the Female - Front part of the couple (weight 2.1 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace in the top right of the triangular piece. The second row contains 3 images of the Male – Back part of the couple (weight 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace at the top and below it the word "EXPORT" and the number "76548" which is an example of a herd mark.
Other information
Manufacturer's code: CPCPID005
Note: This tag has been approved for export purposes (in the event the importing country requires such ear tag with a herd mark). Includes 5-character herd mark.
|
Pig |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Triangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-04
The image includes 6 different views of a yellow EID couple. The first row contains 3 images of the circular Female - Front part of the EID couple (weight 3.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace followed by the identification number "124 000 499 999 999" which is the last number in the range of identification numbers for pigs. The second row contains 3 images of the triangular Male – Back part of the EID couple (weight 3.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the identification number "124000 499 999 999". Below the trademark and identification number is the number "12345B" in a large, bold font.
Other information
Manufacturer's code: CPCEIDS31
Note: Includes an identification number unique to the animal using the ISO 11784 standard (15 digits). A 6-character management number may be added voluntarily.
|
Pig |
RFID (FDX) ear tag |
Yellow/Round |
Yellow/Rectangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-05
The image includes 6 different views of a yellow EID couple. The first row contains 3 images of the circular Female - Front part of the EID couple (weight 3.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace followed by the identification number "124 000 499 999 999" which is the last number in the range of identification numbers for pigs. The second row contains 3 images of the triangular Male – Back part of the EID couple (weight 4.6 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the identification number "124000 499 999 999" which is the last number in the range of identification numbers for pigs. Below the trademark and identification number is the number "12345B" in a large, bold font.
Other information
Manufacturer's code: CPCEIDS33
Note: Includes an identification number unique to the animal using the ISO 11784 standard (15 digits). A 6-character management number may be added voluntarily.
|
Pig |
RFID (FDX) ear tag |
White/Round |
Yellow/Triangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-06A
The image includes 6 different views of a white female part and a yellow male part of a EID couple. The first row contains 3 images of the circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace followed by the identification number "124 000 499 999 999" which is the last number in the range of identification numbers for pigs and the letter "E" to designate type of chip inserted inside the tag. The second row contains 3 images of the triangular Male – Back part of the EID couple (weight 3.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the identification number "124000 499 999 999". Below the trademark and identification number is the number "12345B" in a large, bold font.
Other information
Manufacturer's code: CPCEIDS35
Note: Includes an identification number unique to the animal using the ISO 11784 standard (15 digits). A 6-character herd management number may be added voluntarily.
|
Pig |
RFID (HDX) ear tag |
White/Round |
Yellow/Triangle |
Allflex |
Canadian Pork Council |
2014/07/01 |
POR-01-06B
The image includes 6 different views of a white female part and a yellow male part of an EID couple. The first row contains 3 images of the circular Female - Front part of the EID couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace followed by the identification number "124 000 499 999 999" which is the last number in the range of identification numbers for pigs and the letter "E" to designate type of chip inserted inside the tag. The second row contains 3 images of the triangular Male – Back part of the EID couple (weight 3.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the number "76548" which is an example of a herd mark. Below the trademark and herd mark is an example of a herd management number "12345B" in a large, bold font.
Other information
Manufacturer's code: CPCEIDC35
Note: Includes a 5-character herd mark. A 6-character herd management number may be added voluntarily.
|
Pig |
RFID (HDX) ear tag |
White/Round |
Yellow/Rectangle |
Allflex |
Canadian Pork Council |
2017/11/20 |
POR-01-07A
The image includes 6 different views of a white female part and a yellow male part of a EID couple. The first row contains 3 images of the circular Female - Front part of the couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace followed by the identification number "124 000 499 999 999" which is the last number in the range of identification numbers for pigs and the letter "E" to designate type of chip inserted inside the tag. The second row contains 3 images of the rectangular Male – Back part of the couple (weight 4.6 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the identification number "124000 499 999 999" which is the last number in the range of identification numbers for pigs. Below the trademark and identification number is an example of a herd management number "12345B" in a large, bold font.
Other information
Manufacturer's code: CPCEIDS37
Note: Includes an identification number unique to the animal using the ISO 11784 standard (15 digits). A 6-character herd management number may be added voluntarily.
|
Pig |
RFID (HDX) ear tag |
White/Round |
Yellow/Rectangle |
Allflex |
Canadian Pork Council |
2017/11/20 |
POR-01-07B
The image includes 6 different views of a white female part and a yellow male part of a EID couple. The first row contains 3 images of the circular Female - Front part of the couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark for PigTrace followed by the identification number "124 000 499 999 999" which is the last number in the range of identification numbers for pigs and the letter "E" to designate type of chip inserted inside the tag. The second row contains 3 images of the rectangular Male – Back part of the couple (weight 4.6 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark for PigTrace followed by the number "76548" which is an example of a herd mark. Below the trademark and herd mark is an example of a herd management number "12345B" in a large, bold font.
Other information
Manufacturer's code: CPCEIDC37
Note: Includes a 5-character herd mark. A 6-character herd management number may be added voluntarily.
|
Goat
(Caprine) |
RFID (FDX) ear tag |
Orange/Round |
Orange/Triangle |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-01-01
The image includes six different views of an orange, circular EID couple. The first row contains three images of the Female - Front part of the EID couple (weight 2.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency and the identification number 124 000 344 999 999 which is the last number in the range of identification numbers for capine species. The second row contains three images of the Male – Back part of the EID couple (weight 1.7 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency.
Other information
Manufacturer's code: CGF-OS31OS31
|
Goat
(Caprine) |
RFID (FDX-B) One-piece ear tag |
Orange/One-piece |
Orange/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-06-01A
The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID tag (weight 3.1 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID piece, followed by the number "344999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the female part containing the RFID piece on the left and the male part on the right.
Other information
Manufacturer's code: ASGOEFSPC
Name, other reference: ASET RFID tag
Note: Physically, it is the same indicator as CAP-06-01B
|
Goat
(Caprine) |
Non-electronic ear tag |
Orange/One-piece |
Orange/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-06-02A
The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped non-RFID tag (weight 2.4 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" and the letters "VIS" over the female end, followed by the number "344999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the female part on the left and the male part on the right.
Other information
Manufacturer's code: ASGOE0SPC
Name, other reference: ASET visual tag
Note: Physically, it is the same indicator as CAP-06-02B
|
Goat
(Caprine) |
RFID (HDX-B) One-piece ear tag |
Orange/One-piece |
Orange/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-06-03A
The image includes 3 different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID tag (weight 3.15 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID piece, followed by the number "340999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the female part containing the RFID piece on the right and the male part on the left.
Other information
Manufacturer's code: ASGOEHSPC
Name, other reference: ASET RFID tag
Note: Physically, it is the same indicator as CAP-06-03B
|
Goat
(Caprine) |
RFID (FDX-B) One-piece tail web tag |
Orange/One-piece |
Orange/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-06-01B
The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID tag (weight 3.1 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID piece, followed by the number "344999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the female part containing the RFID piece on the left and the male part on the right.
Other information
Manufacturer's code: ASGOEFSPC
Name, other reference: ASET RFID tag
Note: Physically, it is the same indicator as CAP-06-01A
|
Goat
(Caprine) |
Non-electronic tail web tag |
Orange/One-piece |
Orange/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-06-02B
The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped non-RFID tag (weight 2.4 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" and the letters "VIS" over the female end, followed by the number "344999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the female part on the left and the male part on the right.
Other information
Manufacturer's code: ASGOE0SPC
Name, other reference: ASET visual tag
Note: Physically, it is the same indicator as CAP-06-02A
|
Goat
(Caprine) |
RFID (HDX-B) One-piece tail web tag |
Orange/One-piece |
Orange/One-piece |
Shearwell |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-06-03B
The image includes 3 different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID tag (weight 3.15 g) that is one solid piece with the female and male parts on opposite ends. The first image of the front view, with the female and male parts facing down, shows the identification number "124000" over the female end containing the RFID piece, followed by the number "340999999" in the middle, and the trademark of the Canadian Cattle Identification Agency over the male end. The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the female part containing the RFID piece on the right and the male part on the left.
Other information
Manufacturer's code: ASGOEHSPC
Name, other reference: ASET RFID tag
Note: Physically, it is the same indicator as CAP-06-03A
|
Goat
(Caprine) |
RFID (HDX) leg band |
Orange/One-piece |
Orange/One-piece |
Datamars |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-08-01
The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped RFID tag (weight 16.7 g) that is one solid piece and is wider at one end. A T-shaped hole is in the wide part of the tag and a small rectangular hole is on the narrow part of the tag, which is used for fitting the tag at different widths around the leg. The RFID piece of the tag is at the wide end of the tag and is contained in a long, narrow part that sticks out like an antenna beside the rectangular piece of the tag. The first image of the front view shows the identification number "124000344999999" at the top of the middle piece of the tag, with the number "9999" in large, bold font in the middle and the trademark of the Canadian Cattle Identification Agency below it. On the antenna piece of the tag is the number "124000344999999". The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the female part on the left and the male part on the right.
Other information
Manufacturer's code: 982 0000-273
Name, other reference: Datamars ARaymond HDX Leg Band
|
Goat
(Caprine) |
Non-electronic leg band |
Orange/One-piece |
Orange/One-piece |
Datamars |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CAP-08-02
The image includes three different views (the front, rear and profile/side view) of an orange, thin, rectangular-shaped non-RFID tag (weight 16.0 g) that is one solid piece and is wider at one end. A T-shaped hole is in the wide part of the tag and a small rectangular hole is on the narrow part of the tag, which is used for fitting the tag at different widths around the leg. There is a long, narrow part that sticks out like an antenna beside the rectangular piece of the tag. The first image of the front view shows the identification number "124000344999999" at the top of the middle piece of the tag, with the number "9999" in large, bold font in the middle and the trademark of the Canadian Cattle Identification Agency below it. On the antenna piece of the tag is the number "124000344999999". The second image of the rear view shows the tag with the female and male parts facing up. The last image of the profile/side view shows the tag on its side with the female part on the left and the male part on the right.
Other information
Manufacturer's code 982 0000-272
Name, other reference Datamars ARaymond Visual Leg Band
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Panel |
Yellow/Round and Yellow/Panel |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CER-01-01B
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 5.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 4.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: CACER023/CACER025 Note: The indicators would be approved for all cervids but recommended for red deer and reindeer. Same tags as CER-01-01 but with different marking.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Panel |
Yellow/Round and Yellow/Panel |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CER-01-01B1
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female – Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species. The second row contains three images of the Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 5.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 4.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: CD-G11H11L11M11-10 Note: The indicators would be approved for all cervids but recommended for red deer and reindeer. Same tags as CER-01-01B but the male portion has been replaced.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Panel |
Yellow/Round and Yellow/Panel |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CER-01-02B
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 10.8 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 4.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: CACER033/CACER035 Note: The indicators would be approved for all cervids but recommended for elk and moose. Same tags as CER-01-02 but with different marking.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Panel |
Yellow/Round and Yellow/Panel |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CER-01-02B1
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female – Front part of the EID couple (weight 9.6 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 2 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 10.8 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 4.0g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: CD-G11H11X11M11-10 Note: The indicators would be approved for all cervids but recommended for elk and moose. Same tags as CER-01-02B but the male portion has been replaced.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Triangle |
Yellow/Round and Yellow/Triangle |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CER-01-03B
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 3.7 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 3.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 2.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "3349" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: CACER043/CACER045 Note: The indicators would be approved for all cervids but recommended for elk and moose. Same tags as CER-01-03 but with different marking.
|
Cervid |
Non-electronic ear tags |
Yellow/Panel and Yellow/Panel |
Yellow/Panel and Yellow/Panel |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CER-01-11
The image includes six different views of a yellow, circular visual tag, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the visual couple (weight 8.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, and below it the number "99999" in large, bold font. The second row contains three images of the Male – Back part of the visual couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" and below it the number "99999" in large, bold font. The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 5.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 4.0 g). The image of the front view shows the number "124 000 334 999 999" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: CAVCER023/CAVCER025 Note: The indicators would be approved for all cervids but recommended for red deer and reindeer.
|
Cervid |
Non-electronic ear tags |
Yellow/Panel and Yellow/Panel |
Yellow/Panel and Yellow/Panel |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CER-01-12
The image includes six different views of a yellow, circular visual couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the visual couple (weight 10.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, and below it the number "99999" in large, bold font. The second row contains three images of the Male – Back part of the EID couple (weight 4.0 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" and below it the number "99999" in large, bold font. The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 10.8 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "124 000 334 999 999" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 4.0 g). The image of the front view shows the number "124 000 334 999 999" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: CAVCER033/CAVCER035 Note: The indicators would be approved for all cervids but recommended for elk and moose.
|
Cervid |
Non-electronic ear tags |
Yellow/Triangle and Yellow/Triangle |
Yellow/Triangle and Yellow/Triangle |
Allflex |
Canadian Cattle Identification Agency |
Date at which proposed regulations would come into force |
CER-01-13
The image includes six different views of a yellow, triangular visual couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the visual couple (weight 3.0 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font. The second row contains three images of the Male – Back part of the visual couple (weight 2.5 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font. The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 3.0 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 2.5 g). The image of the front view shows the trademark of the Canadian Cattle Identification Agency followed by the number "1240003349" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: CAVCER043/CAVCER045 Note: The indicators would be approved for all cervids but recommended for white-tailed deer, mule deer and fallow deer.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Trianglular panel |
Yellow/Round and Yellow/Trianglular panel |
Allflex |
Attestra |
Date at which proposed regulations would come into force |
CER-01-01
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 6.0 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499" and below it the number "9999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 5.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499", a barcode and below it the number "9999" in large, bold font.
Other information Manufacturer's code: ATQCER023/ATQCER025 Note: The indicators would be approved for all cervids but recommended for red deer and reindeer. Those tags are gradually being phased out since February 2015.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Trianglular panel |
Yellow/Round and Yellow/Trianglular panel |
Allflex |
Attestra |
Date at which proposed regulations would come into force |
CER-01-01A
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 6.0 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499" and below it the number "9999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 5.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499", a barcode and below it the number "9999" in large, bold font.
Other information Manufacturer's code: ATQCER023/ATQCER025 Note: The indicators would be approved for all cervids but recommended for red deer and reindeer. Same tags as CER-01-01 but with different marking.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Trianglular panel |
Yellow/Round and Yellow/Trianglular panel |
Allflex |
Attestra |
Date at which proposed regulations would come into force |
CER-01-02
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 11.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499" and below it the number "9999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 5.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499", a barcode and below it the number "9999" in large, bold font.
Other information Manufacturer's code: ATQCER033/ATQCER035 Note: The indicators would be approved for all cervids but recommended for elk and moose. Those tags are gradually being phased out since February 2015.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Trianglular panel |
Yellow/Round and Yellow/Trianglular panel |
Allflex |
Attestra |
Date at which proposed regulations would come into force |
CER-01-02A
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 9.3 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the large, triangular secondary tag (weight 11.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499" and below it the number "9999" in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the large, triangular secondary tag (weight 5.5 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "33499", a barcode and below it the number "9999" in large, bold font.
Other information Manufacturer's code: ATQCER033/ATQCER035 Note: The indicators would be approved for all cervids but recommended for elk and moose. Same tags as CER-01-02 but with different marking.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Triangle |
Yellow/Round and Yellow/Triangle |
Allflex |
Attestra |
Date at which proposed regulations would come into force |
CER-01-03
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 3.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by an asterisk symbol and the number "334999999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the small, triangular secondary tag (weight 2.1 g). The image of the front view shows the letters "CA" and the logo for the province of Québec and the number "99999" below it in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the small, triangular secondary tag (weight 1.7 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "3349" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: ATQCER043/ATQCER045 Note: The indicators would be approved for all cervids but recommended for white-tailed deer, mule deer and fallow deer. Those tags are gradually being phased out since February 2015.
|
Cervid |
RFID (FDX+) ear tag; Secondary non-electronic ear tag |
Yellow/Round and Yellow/Triangle |
Yellow/Round and Yellow/Triangle |
Allflex |
Attestra |
Date at which proposed regulations would come into force |
CER-01-03A
The image includes six different views of a yellow, circular EID couple, and six different views of a yellow, triangular secondary tag. The first row contains three images of the Female - Front part of the EID couple (weight 3.8 g) and shows the front, rear and profile/side view of the female part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by an asterisk symbol and the number "124 000 334 999 999" which is the last number in the range of identification numbers for cervid species, on the circular EID. The second row contains three images of the Male – Back part of the EID couple (weight 1.9 g) and shows the front, rear and profile/side view of the male part. The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "334999999". The third and fourth rows show the secondary tag which is a large, yellow triangular tag. The third row contains three images and shows the front, rear and profile/side view of Female – Front part of the small, triangular secondary tag (weight 2.1 g). The image of the front view shows the letters "CA" and the logo for the province of Québec and the number "99999" below it in large, bold font. The fourth row contains three images and shows the front, rear and profile/side view of Male – Back part of the small, triangular secondary tag (weight 1.7 g). The image of the front view shows the letters "CA" and the logo for the province of Québec followed by the number "3349" and below it the number "99999" in large, bold font.
Other information Manufacturer's code: ATQCER043/ATQCER045 Note: The indicators would be approved for all cervids but recommended for white-tailed deer, mule deer and fallow deer. Same tags as CER-01-03 but with different marking.
|
Cervid |
Non-electronic metal ear tag |
Silver/One-piece |
Silver/One-piece |
Ketchum |
Government of British Columbia (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-07-01
The image includes three different views of a metal, thin rectangular-shaped clip (weight 4.2 g) that is one solid piece and is bent in the middle. The clip is made of stainless steel and is not painted, with two square holes on the left side when the tag is facing up. The image on the left shows the bend of the clip on the left side, with the number "5852F" facing out and the tip of the right side of the clip slightly bent towards the inside of the clip. The image on the centre shows the bend of the clip on the right side, with the number "BC-F" facing out beside the two square holes on the left.
Other information Manufacturer's Code: Not allocated Name, other reference: Metal Tag, Kurl-Lock #3 Tag Notes: Those tags, pre-approved for all cervids, are gradually being phased out since December 2018. Identification number on front of the tag is made of four digits, followed by a birth year code. The marking "BC-F" is printed on the back of the tag.
|
Cervid |
Non-electronic metal ear tag |
Silver/One-piece |
Silver/One-piece |
Ketchum |
Government of Alberta (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-07-02
The image includes three different views of a metal, thin rectangular-shaped clip (weight 4.2 g) that is one solid piece and is bent in the middle. The clip is made of stainless steel and is not painted, with a lock system on the left side when the tag is facing up. The image on the left shows the bend of the clip on the left side, with the marking "ALTA AG" above another marking "AMSW" facing out and the tip of the right side of the clip slightly bent towards the inside of the clip. The image on the centre shows the bend of the clip on the right side, with the number "22X" facing out.
Other information Manufacturer's Code: Not allocated Name, other reference: Metal Tag, Kurl-Lock #3 Tag Notes: Those tags, pre-approved for all cervids, are gradually being phased out. To comply with the double-tagging requirement, the application of any combination of the three Alberta provincially-approved tags would be approved. Printed with a registration number and herd letters that indicate the farm of origin.
|
Cervid |
Non-electronic metal ear tag |
Various/One-piece |
Various/One-piece |
Ketchum |
Government of Saskatchewan (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-07-03
The image includes three different views of a metal, thin rectangular-shaped clip (weight 6.0 g), that is one solid piece and is bent in the middle. The clip is made of stainless steel and is painted yellow on one side and orange on the other, with a lock system on the left side when the tag is facing up. The image on the left shows the bend of the clip on the left side, with the marking "SASKAG" (standing for Saskatchewan Agriculture) facing out and the tip of the right side of the clip slightly bent towards the inside of the clip. The image on the centre shows the bend of the clip on the right side, with the number "031249" facing out.
Other information Manufacturer's Code: Not allocated Name, other reference: Metal Tag, Kurl-Lock #3 Tag Colour: Yellow (elk, whitetail deer, mule deer, fallow deer), Orange (whitetail deer), blue (reindeer, caribou, moose, antelope, mountain goat, musk deer, big horn/thin horn/mouflon sheep) Notes: Those tags, pre-approved for all cervids, are gradually being phased out. To comply with the double-tagging requirement, the application of any combination of the five Saskatchewan provincially-approved tags would be approved. Saskatchewan metal tags consist of six or seven numbers and may end in a birth year letter.
|
Cervid |
Non-electronic ear tag |
Various/Triangular Panel |
Various/Round |
Allflex |
Government of Alberta (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-01-04
The image includes 6 different views of a yellow circular and triangular non-electronic couple. The first row contains 3 images of the female part of the tag (combined weight with male part of 11.5 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows the code "ALTA AG" (standing for Alberta Agriculture) and below it the code "AZZZ" in large, bold font. The image of the rear view shows the code "1F" in large, bold font. The second row contains 3 images of the circular male part of the tag: the front, rear and profile/side view. The image of the front view shows the marking "ALTA AG".
Other information Manufacturer's Code: GTXF-color Name/Other Reference: Maxi Colour: Green, orange, pink, red, white or yellow Notes: Those tags, pre-approved for all cervids, are gradually being phased out. To comply with the double-tagging requirement, the application of any combination of the three Alberta provincially-approved tags would be approved. Those tags are printed with a registration number and herd letters that indicate the farm of origin.
|
Cervid |
Non-electronic ear tag |
Various/Triangular Panel |
Various/Round |
Allflex |
Government of Alberta (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-01-05
The image includes 6 different views of an orange circular and triangular non-electronic couple. The first row contains 3 images of the female part of the tag (combined weight with male part of 5.9 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows the code "ALTA AG" (standing for Alberta Agriculture) and below it the code "ABCW" in large, bold font. The image of the rear view shows the code "52F" in large, bold font. The second row contains 3 images of the circular male part of the tag: the front, rear and profile/side view. The image of the front view shows the marking "ALTA AG".
Other information Manufacturer's Code: GTLF-color Colour: Green, orange, pink, red, white or yellow Notes: Those tags, pre-approved for all cervids, are gradually being phased out. To comply with the double-tagging requirement, the application of any combination of the three Alberta provincially-approved tags would be approved. Those tags are printed with a registration number and herd letters that indicate the farm of origin.
|
Cervid |
Non-electronic ear tag |
Various/Triangular Panel |
Various/Round |
Allflex |
Government of Saskatchewan (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-01-06
The image includes 6 different views of a pink circular and yellow triangular non-electronic couple. The first row contains 3 images of the female part of the tag (combined weight with male part of 11.5 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows a wheat sheaf (official symbol of Saskatchewan) and below it the code "2 E" ("2" being the animal identification number" and "E" the birth year letter) in large, bold font. The image of the rear view shows the code "SRAB" ("S" standing for Saskatchewan and "RAB" being the herd prefix) in large, bold font. The second row contains 3 images of the circular male part of the tag: the front, rear and profile/side view.
Other information Manufacturer's Code: GTXF-color Name, other reference: Maxi, double-sided printing Colour: Green, red, yellow, orange, white or pink Notes: Those tags, pre-approved for all cervids, are gradually being phased out. To comply with the double-tagging requirement, the application of any combination of the five Saskatchewan provincially-approved tags would be approved. Markings on plastic tags issued by Saskatchewan: "S" for Saskatchewan, the herd prefix (consisting of three letters), three numbers and a letter that represents the year of birth, e.g. "SSAF002Z". Part of the tag number on plastic tags may be on the back, so the full number can only be captured by reading the information on both sides.
|
Cervid |
Non-electronic ear tag |
Various/Triangular Panel |
Various/Round |
Allflex |
Government of Saskatchewan (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-01-07
The image includes 6 different views of a pink circular and an orange triangular non-electronic couple. The first row contains 3 images of the female part of the tag (combined weight with male part of 11.5 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the rear view shows on the left side a wheat sheaf (official symbol of Saskatchewan), and; the marking "S MRC" ("S" standing for Saskatchewan, "MRC" being the herd prefix, "018" being the animal identification number, and "U" being the birth year letter) and below it the code "018 U" in bold font. The second row contains 3 images of the circular male part of the tag: the front, rear and profile/side view.
Other information Manufacturer's Code: GTXF-color Name, other reference: Maxi, single-sided printing Colour: Green, red, yellow, orange, white or pink Notes: Those tags, pre-approved for all cervids, are gradually being phased out. To comply with the double-tagging requirement, the application of any combination of the five Saskatchewan provincially-approved tags would be approved. Markings on plastic tags issued by Saskatchewan: "S" for Saskatchewan, the herd prefix (consisting of three letters), three numbers and a letter that represents the year of birth, e.g. "SSAF002Z". Part of the tag number on plastic tags may be on the back, so the full number can only be captured by reading the information on both sides.
|
Cervid |
Non-electronic ear tag |
Various/Triangular Panel |
Various/Round |
Allflex |
Government of Saskatchewan (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-01-08
The image includes 6 different views of a pink circular and yellow triangular non-electronic couple. The first row contains 3 images of the female part of the tag (combined weight with male part of 5.9 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows a wheat sheaf (official symbol of Saskatchewan) and below it the code "104 Y" ("104" being the animal identification number" and "Y" being the birth year letter) in large, bold font. The image of the rear view shows the code "S RAB" in large ("S" standing for Saskatchewan and "ARB" being the herd prefix), bold font. The second row contains 3 images of the circular male part of the tag: the front, rear and profile/side view.
Other information Manufacturer's Code: GTLF-color Name, other reference: Large, double-sided printing Colour: Green, red, yellow, orange, white or pink Notes: Those tags, pre-approved for all cervids, are gradually being phased out since December 2018. To comply with the double-tagging requirement, the application of any combination of the five Saskatchewan provincially-approved tags would be approved. Markings on plastic tags issued by Saskatchewan: "S" for Saskatchewan, the herd prefix (consisting of three letters), three numbers and a letter that represents the year of birth, e.g. SSAF002Z. Part of the tag number on plastic tags may be on the back, so the full number can only be captured by reading the information on both sides.
|
Cervid |
Non-electronic ear tag |
Various/Triangular Panel |
Various/Round |
Allflex |
Government of Saskatchewan (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-01-09
The image includes 6 different views of a pink circular and yellow triangular non-electronic couple. The first row contains 3 images of the female part of the tag (combined weight with male part of 5.9 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the rear view shows on the left side a wheat sheaf (official symbol of Saskatchewan), and; the marking "S DTT" ("S" standing for Saskatchewan; "DTT" being a herd prefix) and below it the code "123 S" in bold font ("123" being the animal identification number, and "S" being the birth year letter). The second row contains 3 images of the circular male part of the tag: the front, rear and profile/side view.
Other information Manufacturer's Code: GTLF-color Name, other reference: Large, double-sided printing Colour: Green, red, yellow, orange, white or pink Notes: Those tags, pre-approved for all cervids, are gradually being phased out since December 2018. To comply with the double-tagging requirement, the application of any combination of the five Saskatchewan provincially-approved tags would be approved. Markings on plastic tags issued by Saskatchewan: "S" for Saskatchewan, the herd prefix (consisting of three letters), three numbers and a letter that represents the year of birth, e.g. SSAF002Z. Part of the tag number on plastic tags may be on the back, so the full number can only be captured by reading the information on both sides.
|
Cervid |
Non-electronic ear tag |
Various/Rectangle |
Various/Rectangle |
Allflex |
Government of Saskatchewan (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-01-14
The image consists of three different views (the front, back and profile/side view) of a thin rectangular white tag (weight: 4 g) with female and male parts. The first image of the front view of the female part shows the inscription "SASK" on a first row and "AG" below. The second image of the rear view shows the female part of the tag. The last picture in the first row shows the side view of the female part with the inscription "SHEF". The second row shows images of the male part. The first image shows a front view of the tag with the inscription "008D". The second image shows the rear view. The last image shows the side view of the male part with the inscription "SASK" on a first row and "AG" below.
Other information Manufacturer's Code: GPM-color Colour: Producers choice from: green, red, yellow, orange, white, pink, blue Notes: Pre-approved for all cervids. For the double-tagging requirement, the application of any combination of the five Saskatchewan provincially-approved tags would be approved.
|
Cervid |
Non-electronic ear tag |
White/Triangular Panel and White/Triangular Panel |
White/Round and White/Round |
Allflex |
Government of Manitoba (non-ISO provincial identification numbering scheme) |
Date at which proposed regulations would come into force |
CER-01-10
The image includes 6 different views of two identical tags, each one made up of a white circular and triangular non-electronic couple. The first row contains 3 images of the female part of the tag (combined weight with male part of 11.5 g) and shows the front, rear and profile/side view of the large, triangular female part. The image of the front view shows the code "MMSC" (corresponding to a herd) and below it the number "0020" (corresponding to the identification number of the animal) in large, bold font. The image of the rear view shows a bison (symbol of the province of Manitoba), and the marking "MANITOBA AGRICULTURE FOOD AND RURAL INITIATIVES" below it. The second row contains 3 images of the circular male part of the tag: the front, rear and profile/side view. The image of the front view shows the marking "MAN. AGRI".
Other information Manufacturer's Code: GTLF-color Name/Other Reference: Maxi Notes: Those tags, pre-approved for all cervids, are gradually being phased out since December 2018. The primary tag is applied to a cervid's ear and the secondary tag to the other ear. The letters printed on the tag are a herd prefix which is specific and unique for a farm. The numbers printed on the tag is an animal identification number.
|